Placeholder

SW 10 Clear

water base printing paste

Categories: ,

SW 10 Clear

SW 10 Clear is a water based printing base used to achieve an elastic and soft touching effect in textile printing. It can be used as a transparent or can be coloured with pigments.

Description

Advantages
• If used correctly as advised, the washing fastness are high. It provides elastic and soft touch prints.
• It is fixed at (280°F /140°C) , 2mins ; (320°F /160°C) , 1,5mins.
• Suitable to ecological standards.
• Does not dry during the print and block the screen.
• Non clogging clear base on high mesh counts.
• Rubbing and washing tests should be applied 24 hours after curing.
• It is suitable for photographic and CMYK prints.

Applications
• SW 10 Clear has been manufactured for high screen and thin templates.
• Never use water to reduce the viscosity.
• Before use, please stir the product well. Do not use any additives that are not advised.
• After using, the screen should be cleaned with the water and sponge.

Specification

Fabric Types
100% Cotton

Packaging
5/10/20/30/60 Kg.

Mesh No.
77-120 mm

Squeege
70-80 V Type

Curing Time
160⁰C/1,5min 140⁰C/2min

Cleaning
With water and sponge

Health & Safety
MSDS available on request

Viscocity
[(77 °F/25°C) sp: 7, rpm: 4 Brookfield ] : 60.000-75.000 [mPa.s]

Density
1,04 g/cm3 (25 °C/77°F)

pH
6,5 – 8,5

Additives
SW 20 White, S 10 Clear and S 20 White

Additional information

Fabric Type

Printing Type

Component

Product Type