Placeholder

S 10 Matt

S 10 Matt

Categories: ,

S 10 Matt

S 10 Matt is a water based printing base used to achieve an elastic, mat and soft touching effect in textile printing. It can be used as a transparent or can be coloured with pigments.

Description

Advantages
• If used correctly as advised, the dry-wet rubbing and washing fastness are high. It provides elastic and soft-handfeel clear for open mesh.
• It is fixed at (280°F /140°C) , 2mins ; (320°F /160°C) , 1,5mins.
• Suitable to ecological standards.
• Rubbing and washing tests should be applied 24 hours after curing.
Applications
• Nanoflex S 10 Matt has been manufactured for elastic and proper surface printings.
• Never use water to reduce the viscosity.
• Before use, please stir the product well. Do not use any additives that are not advised.
• After using, the screen should be cleaned with the water and sponge.

Specification

Packaging
5/10/20/30/60 Kg.

Mesh No.
43-62 mm

Squeege
55-60 u Type

Curing Time
160⁰C/1,5min

Cleaning
with Synthetic Thinner

Health & Safety
MSDS available on request

Viscocity
[Brookfield ] : 65.000 – 75.000 [mPa.s]

Density
1,05 g/cm3 (25 °C/77°F)

Additives
S 20 White

Additional information

Fabric Type

Printing Type

Component

Product Type