Puff HR 200 S

Puff HR 200 S

Categories: ,

Puff HR 200 S

It is a water based printing base used to achieve so touching effect in textile printing. It is colored with pigments.

Description

Advantages
It is possible to obtain proper & intumescent surface with Puff HR 200 S.
There are two types intumescent paste as low & high temperature
It is fixed under the advised conditions. Puff HR 200 S has extremely wash fastness.
It is fixed at (280°F /140°C) , 2mins ; (320°F /160°C) , 1,5mins.
Suitable to ecological standards.
• It provides to elastic and soft-handfeel suede puff effect.

Applications
 Puff HR 200 S has been manufactured or intumescent printings.
Before use, please stir Puff HR 200 S well. Do not use any additives that are not advised.
After using, the silk-screen should be cleaned with water.
Never use water to reduce the viscosity.

Specification

Packaging
5/ 10/ 20/ 30/ 60 kg.

Mesh No.
34-90 mm

Squeege
50-70 U Type

Curing Time
160⁰C/1,5min 140⁰C/2min

Cleaning
with Synthetic Thinner

Health & Safety
MSDS available on request

Viscocity
(77°F/25°C) sp:7,rpm:20 Brookfield] : 50.000 – 65.000 [mPa.s]

Density
1,02 g/cm3 (77 °F) (25 °C/77°F)

pH
7,5 – 8,5

Additional information

Fabric Type

, ,

Printing Type

Component

Product Type