Puff HR 100 M
It is water-based auxiliary materials that used to reduce viscosity of printing paste without any changing on their print propery & fastness. It is an antiembolic product.
Puff HR 100 M
Puf HR 100 M
Description
Advantages
• It is possible to obtain proper & intumescent surface with Puff HR 100 M.
• There are two types intumescent paste as low & high temperature
• It is fixed under the advised conditions. Puff HR 100 M has extremely wash fastness.
• It is fixed at (280°F /140°C) , 2mins ; (320°F /160°C) , 1,5mins.
• Suitable to ecological standards.
Applications
• Puff HR 100 M has been manufactured or intumescent printings.
• Before use, please stir Puff HR 100 M well. Do not use any additives that are not advised.
• After using, the silk-screen should be cleaned with water.
• Never use water to reduce the viscosity.
Specification
Packaging
5/10/20/30/60 kg.
Mesh No.
34-90 mm
Squeege
50-70 U Type
Curing Time
160⁰C/1,5min 140⁰C/2min
Cleaning
with Synthetic Thinner
Health & Safety
MSDS available on request
Viscocity
(77°F/25°C) sp:7,rpm:20 Brookf ield] : 50.000 – 65.000 [mPa.s]
Density
1,02 g/cm3 (77 °F) (25 °C/77°F)
pH
7,0 – 8,0
Additional information
| Fabric Type | |
|---|---|
| Printing Type | |
| Component | |
| Product Type |
